Yamaha TX5n - Manual (Page 44)

TX6n/5n/4n Reference Manual 44
System Connection Examples
Here is an example of multiple amplifiers connected in a daisy-chain via analog audio signals or digital audio sig-
nals (e.g., AES/EBU).
In the case of analog connection, daisy-chain the [THRU] jack and [IN] jack.
In the case of digital connection (the standard AES-IO card), daisy-chain the [THRU] jack and [IN] jack, or the
[OUT] jack and [IN] jack. The [THRU] jack will output the input signal without change, and the [OUT] jack will
output the signal with processing applied.
In order to monitor and control the amplifiers from Amp Editor, use Ethernet cables to connect the computer to each amplifier.
This allows you to monitor and control all of the amps in the workspace from a single computer.
In the case of digital connections, you’ll need to make word clock settings
(page 20) . Specify whether you want the slot’s
CH 1/2 to be the master clock, or turn Auto Scan Mode on.
Daisy-chain connection via analog or digital audio
Network switch
Amp control
TXn
Amp Editor
Computer
Amp control
Amp control
Amp control
TXn TXn
Mixer
THRU/
OUT
IN
THRU/
OUT
IN IN
Analog audio
or
Digital audio
Analog audio
or
Digital audio
Analog audio
or
Digital audio