Yamaha Digital Sound Projector YSP-3050 - Manual (Page 117)

©2008 All rights reserved. Printed in Malaysia WK75620 [En]
HDMI
OUTPUT
HDMI
OUT
IN
DVD
STB
OUT
SUBWOOFER
VIDEO
HDMI
INPUT
Subwoofer
AUDIO INPUT VIDEO INPUT OUT
AUX 1 TV/STB TV/STB SUBWOOFER AUX 1
DVD AUX 2 VIDEO COMPONENT
STB DVD
DIGITAL INPUT
COAXIAL
OPTICAL
ANALOG
AUDIO OUTPUT
VIDEO
INPUT
1 2
OPTICAL
DIGITAL OUTPUT
COAXIAL
DIGITAL OUTPUT
L
R
YSP-3050
QUICK REFERENCE GUIDE
Supplied accessories used for connections
and operations in this guide
s Audio pin cable (x1)
s OSD* video pin cable (x1)
s
Optical cable (x1)
s
Coaxial cable (x1)
s Digital audio pin cable (x1)
s IntelliBeam microphone (x1)
s Cardboard microphone stand (x1)
s
Demonstration DVD (x1)
*OSD: On-Screen Display
This quick reference guide explains steps to connect a TV and a DVD player/recorder to this unit and achieve
the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be
achieved. You may install this unit in parallel with the wall or in the corner.
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before
installing this unit.
We recommend that you temporarily place and arrange all components in order to decide which procedure must come first. In case you
install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.
For further information on installation, see page 13 in the Owner’s Manual.
Installing this unit
1
Connecting external components such as a TV or DVD player/recorder to this unit.
Connect your TV or DVD player/recorder to this unit using appropriate cables as shown below.
For further information on connecting other components, see pages 16 to 23 in the Owner’s Manual.
Connecting external components to this unit
2
Install this unit in the exact center of the wall when it is
measured from the left and right corners.
The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of
cloth on the floor in step 2.
1
Place this unit in front of
the rack.
2
Place this unit upside down
and connect this unit to your
TV and DVD player/recorder.
3
Install this unit in the
rack.
4
Installation is completed.
Install this unit in the corner at a 40º to 50º angle from the
adjacent walls.
40º to 50º
An object, such as furniture An object, such as furniture
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
y Hint
Note
• To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
• You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions
supplied with the metal wall bracket.
Be careful not to leave scratches on this unit or the rack.
This connection example shows a way to connect external components such as a TV or DVD
player/recorder to this unit by using the supplied cable.
You can enjoy the multi-channel audio from the
DVD player/recorder and the analog/digital audio from the TV. Use the video pin cable supplied with your
DVD player/recorder to make a video connection between your DVD player/recorder and TV.
Connection
example 1
Sold separately
1
HDMI cable
(Displays the DVD digital video and the YSP-3050 menu
screen on the TV)
2
HDMI cable
(Inputs the DVD digital audio/video signals to this unit)
Connect cables in the following order
Supplied
1
Audio pin cable
(Inputs the TV analog audio sounds to this unit)
2
OSD video pin cable
(Displays the YSP-3050 menu screen on the TV)
3
Optical cable
(Inputs the TV digital audio sounds to this unit)
4
Digital audio pin cable
(Inputs the DVD digital audio sounds to this unit)
Connect cables in the following order
Continued
on the back
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
Note
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
y Hint
If you connect this unit to an HDMI control-compatible TV (except
some models) via HDMI, you can use the remote control supplied
with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
Note
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
This connection example shows a way to make the most of the capability of this unit. You can enjoy
DVD audio and video with higher quality via the HDMI cable. In case your TV does not have a built-in
digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite tuner, cable TV
tuner, or digital airwave tuner via the HDMI cable. For details, see “Connections using HDMI cables” on
page 18 and “Using the HDMI control feature” on page 73 in the Owner’s Manual.
Connection
example 2
Continued
on the back
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
Digital satellite tuner/
Cable TV tuner/
Digital airwave tuner
1
(Sold separately)
DVD player/recorder
DVD player/recorder
TV
2
(Sold separately)
To the AC wall outlet
YSP-3050
Audio connection
HDMI connection
Subwoofer
Do not plug the power supply cable
into an AC wall outlet until all
connections are complete.
This connection is not
necessary if your TV has a
built-in digital satellite tuner,
cable TV tuner, or digital
airwave tuner. Use the optical
cable supplied with this unit to
make an audio connection
between your TV and this unit.
For details, see “Connection
example 1”.
1 2 3 4
TV
To the AC wall outlet
YSP-3050
Audio connection
Video connection
Do not plug the power supply cable
into an AC wall outlet until all
connections are complete.
* The rear panel illustration shows jacks and their names to help you find them easily.
They are not exactly the same as the ones on the actual rear panel of this unit.
1. Pull out the cap
2. Check the direction
Optical cable
Pull out the cap
before connecting
the optical cable,
and then check
the direction to
insert the cable.
Subwoofer
* If TV built-in tuner is used, connect the
optical digital output jack on your TV to
the TV/STB OPTICAL DIGITAL INPUT
jack on this unit (see "Connecting a TV
without an HDMI cable" on page 21 in
the Owner's Manual).