Yamaha Digital Sound Projector YSP-3050 - Manual (Page 24)

20
En
Connections
If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not
support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component
(e.g., VCR) to the AUX 1 AUDIO INPUT jacks on this unit.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).
If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at
the AUX 1 OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the AUX 1 AUDIO INPUT jacks.
OSD video pin cable Audio pin cable
Optical cable
Digital audio pin cable
Case 3: Connecting other connection methods
Note
DIGITAL INPUT VIDEO INPUT
VIDEO COMPONENT AUX 2 DVD
SUBWOOFER AUX 1 TV/STB STB DVD TV/STB
COAXIAL
OPTICAL
AUX 1
OUT AUDIO INPUT
2 1 3
Optical
digital
output
DVD player/recorder, VCR,
game console, CD player, etc.
Coaxial
digital
output
Video signal to the TV
Video
input
TV
R L
Analog audio
output
Rear panel of this unit
Video Audio