Decoder indicators, Input channel indicators, Surround modes and recommended sources – Yamaha Digital Sound Projector YSP-3050 User Manual

Page 62

Advertising
background image

58

En

Enjoying surround sound

Decoder indicators

Depending on the input source and the selected surround
mode, the decoder indicators in the front panel display
light up as follows:

y

• You can select an input mode (AUTO, DTS, or ANALOG) by

pressing INPUTMODE repeatedly (see page 90).

• Discs encoded in DTS-ES, Dolby Digital 5.1 EX, Dolby Digital

EX, or Dolby Digital Surround EX will be played back in DTS
or Dolby Digital.

Input channel indicators

Depending on the channel component of the current
digital input signal, the input channel indicators in the
front panel display light up as follows:

Surround modes and recommended

sources

• When you select an input source (see page 39), the surround

mode used for the previously selected input source is
automatically selected.

• If the power of this unit is turned off and on again, the surround

mode used for the previously selected input source before the
power was turned off is automatically selected.

• If the surround modes are not available, “Prohibit” appears in

the front panel display when you press SUR. DECODE.

• The surround modes are available:

– when the beam mode is set to a setting other than the 2-

channel or 5-channel stereo playback (see page 62) and My
Surround (see page 57).

– when the CINEMA DSP programs are turned off

(see page 67).

– when the movie program is selected as the CINEMA DSP

program (see page 66). In this case, only Dolby Pro Logic,
Dolby Pro Logic II Movie, and DTS Neo:6 Cinema are
available.

– when 2-channel signals are being input.
– when the Music Enhancer is turned off (see page 68).

Status

Indicator

When PCM signals are being input

When DTS digital signals are being
input

When DTS Neo:6 is selected as the
surround mode

When Dolby Digital signals are
being input

When Dolby Pro Logic is selected
as the surround mode

When Dolby Pro Logic II is selected
as the surround mode

Status

Indicator

When 2-channel stereo signals are
being input

When 5.1-channel signals are being
input

PCM

+

DIGITAL

PL

PL

Surround mode

Recommended

source

Dolby Pro Logic

All sources

Dolby Pro Logic II

Movie

Music

Game

Movies

Music

Games

DTS Neo:6

Cinema

Music

Movies

Music

Neural Surround

XM Satellite Radio

Notes

Advertising