Before connecting components – Yamaha Digital Sound Projector YSP-3050 User Manual

Page 21

Advertising
background image

17

En

Connections

PREP

ARA

TION

English

Cables used for connections

HDMI cable

Audio pin cable (supplied)

Optical cable (supplied)

Digital audio pin cable (supplied)

3.5 mm stereo mini plug cable

Subwoofer pin cable

OSD video pin cable (supplied)/ Video pin cable

Component video pin cable

Notes on connecting the optical cable

• Pull out the cap before connecting the optical cable.

When you are not using the optical cable, be sure to put the cap
back in place.

• When inserting the cable into the optical digital jack, make sure

the direction is correct.

Affixing cables

To prevent cables from becoming unplugged, place the supplied
cable clamp with the open side facing upward, attach it to the rear
panel of this unit in a suitable position, and then affix cables in
the cable clamp.

Information on HDMI™

Audio signals

• When CPPM copy-protected DVD audio is played back, video and

audio signals may not be output depending on the type of DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or

DVI components.

y

• We recommend that you use an HDMI cable shorter than 5 m

(16 ft) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack

DVI-D jack) to connect

this unit to other DVI components.

Priority order for audio input signals

When multiple types of audio signals are simultaneously
being input from a single source component, this unit
plays back the audio signals in the following priority
order: HDMI

→ Digital → Analog

As default settings, the following input jacks are assigned
to the corresponding input sources:

This unit is compatible with 2-channel PCM signals, but not with
multi-channel PCM signals.

Before connecting components

Audio/Video

Audio

Video

A

(White)

(Red)

(White)

(Red)

(Orange)

(Orange)

5

(Yellow)

(Yellow)

(Green)

(Green)

(Blue)

(Red)

(Blue)

(Red)

Cap

Input source

Audio signal type

DVD video

Dolby Digital, DTS, PCM

DVD audio

2-channel stereo

(up to 96 kHz/24 bit)

Blu-ray Disc

HD DVD

Dolby Digital, DTS, PCM

Notes

Input

jack

Input
source

HDMI

Digital

Analog

TV/STB

DVD

AUX 1

AUX 2

AUX 3

Note

Optical cable

Attach to this unit

Advertising