Yamaha Digital Sound Projector YSP-3050 - Manual (Page 92)

88
En
Adjusting the audio balance
5
Press TEST when you have completed all
your adjustments.
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 62), My Beam (see page 63),
or My Surround (see page 57) is selected as the beam mode.
• “FRONT L/R” cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 57).
• “FRONT L/R” are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 57 and
62).
y
If the level of a particular channel cannot be adjusted, “– –dB”
appears in the front panel display.
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
1
Set the operation mode selector to YSP.
2
Press CH LEVEL repeatedly (or press
CH LEVEL and
/ ) to select the channel
you want to adjust.
The front panel display changes as follows.
“SWFR” is available only when a subwoofer is connected to
this unit and SUBWOOFER is selected for BASS OUT in
SOUND MENU (see page 80).
Notes
Using the audio output being
played back
TEST
ENHANCER MENU
RETURN DISPLAY
TV VOL VOLUME
MUTE
CH LEVEL TEST
TV INPUT TV MUTE
ENTER
CODE SET
CH
ENTRY
CAT/
A-E
YSP
TV/AV
Note
YSP
TV/AV
CH LEVEL
ENTER
CH LEVEL
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
or