Yamaha Digital Sound Projector YSP-3050 - Manual (Page 35)

AUTO SETUP (IntelliBeam)
31
En
SETUP
English
■ Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular part and
two longitudinal parts) of the cardboard microphone stand
originally put together.
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal part into the
crevice of the other longitudinal part.
3
Place the circular part on top of the two
combined longitudinal parts.
4
Place the supplied IntelliBeam microphone
on top of the circular part.
Once the IntelliBeam microphone is firmly connected to
this unit and properly placed in your listening room,
follow the procedure below to start the AUTO SETUP
procedure.
You can also enter the AUTO SETUP procedure simply by
pressing and holding AUTO SETUP for more than two
seconds. In this case, this unit performs both of the beam
optimization and sound optimization procedures.
IntelliBeam
microphone
Center line
1 2
3 4
Using AUTO SETUP (IntelliBeam)
STEREO MY BEAM
PRESET/TUNE MEMORY SEARCH
SLEEP INPUTMODE
ENHANCER MENU
RETURN DISPLAY
TV VOL VOLUME
ENTER
OFF
SPORTS
5BEAM ST+3BEAM 3BEAM
MUSIC MOVIE
VOL MODE
AUTO
SETUP
CAT FM/XM
MACRO
TV
INPUT1
CH
ENTRY
CAT/
A-E
4 6
3 2 1
AUX1 AUX2
STB TV
DVD AUX3
TV
POWER POWER STANDBY/ON
DOCK
+10 0
7 8 9
5
AV
SUR. DECODE
MY SUR.
YSP
TV/AV
STANDBY/ON VOLUME + INPUT