Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 101)

Other settings [FUNCTION]
CLP-380 Owner’s Manual 101
Detailed Settings
You can select whether your performance data or song
playback data is sent via MIDI.
See the procedure on page 80.
Setting range:
Keyboard ............... performance data played on the keyboard
Song....................... song playback data
Normal setting:
Keyboard
This parameter enables you to specify which MIDI data
the Clavinova can receive.
See the procedure on page 80.
Type of data:
Note, Control, Program, Pitch Bend, SysEx (System Exclusive)
Setting range:
On/Off
Normal setting:
On for all types of data
This parameter enables you to specify which MIDI data
the Clavinova can transmit.
See the procedure on page 80.
Type of data:
Note, Control, Program, Pitch Bend, SystemRealTime, SysEx
(System Exclusive)
Setting range:
On/Off
Normal setting:
On for all types of data
You can transmit the panel data, such as voice selection,
to a connected sequencer. Before you record performance
data to a sequencer, it is useful if you first send and record
(at the beginning of the performance data) the panel
setup data for your performance during playback.
See the procedure on page 80.
Selecting performance from the
keyboard or song data for MIDI
transmission
[MidiOutSelect]
Selecting a type of data received via
MIDI
[ReceiveParameter]
B
D
NO YES
A
C
MidiOutSelect
Keyboard
B
D
NO YES
A
C
ReceiveParameter
Note On
Select a type of data. Select on or off.
Selecting a type of data transmitted
via MIDI
[TransmitParameter]
Transmitting the initial settings on the
panel
[InitialSetup]
B
D
NO YES
A
C
TransmitParameter
Note On
Select a type of data. Select on or off.
B
D
NO YES
A
C
InitialSetup Start?-->