Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 36)

Recording Your Performance
CLP-380 Owner’s Manual 36
Basic Operation
Adding data to or recording over an existing song
The previous section explains how to record your performance from the beginning by
selecting a blank “-----: NewSong.” You can also add your performance to or overwrite
existing songs (such as 50 preset songs [P-001 – P-050], commercially-available music
data <see page 50>, or your old recorded performances <see page 39>).
Procedure
1.
Select a song to be recorded over.
To select a preset song, press the [SONG SELECT] button, then press the A [–][+]
buttons to display “PRESET.” To select a song, press the C [–][+] buttons.
To select a song from commercially available music data or from already-recorded
data, press the A [–][+] buttons to display “MEMORY” or “USB1” in the Song
Select screen and press the C [–][+] buttons.
To continue recording, follow the procedure described in “Recording a
performance without specifying the recording part” from pages 32 to 34.
When you record over a preset song, the song is automatically saved to Storage
memory (page 39) when the recording stopped.
When you record over a song of commercially available music data or of already-
recorded data, the display prompts you whether you want to overwrite the song or
not (when recording is stopped). Press the B [+ (YES)] button to overwrite the
song.
Other recording techniques
If you record on a part that already
has data, the existing data on the
part will be lost.
TIP