Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 89)

Detailed settings for the voices [VOICE SETTING]
CLP-380 Owner’s Manual 89
Detailed Settings
You can set the [CHORUS] button on or off for each
voice. When you select a voice, the chorus on/off setting
for the voice automatically changes according to this
parameter.
Even if this parameter is turned on, the chorus effect is disabled if the
ChorusSend parameter is set to 0.
See the procedure on page 80.
Setting range:
On/Off
You can select other effects (than reverb and chorus).
See the procedure on page 80.
Setting range:
DelayLCR............... Delay applied at left, center, and right
positions.
DelayLR ................. Delay applied at left and right positions.
Echo....................... Echo-like delay
CrossDelay ............ Left and right delays are crossed.
Symphonic ............. Adds a rich and deep acoustic effect.
Rotary..................... Adds the vibrato effect of a rotary speaker.
Tremolo .................. The volume level changes in rapid cycles.
VibeRotor ............... The vibrato effect of a vibraphone.
AutoPan ................. The sound pans left to right and back and
forth.
Phaser.................... The phase changes periodically, swelling
the sound.
AutoWah................. The center frequency of the wah filter
changes periodically.
SoundBoard ........... Simulates the reverberation of a piano
soundboard.
Off .......................... No effect.
Rotor= The rotating portion of an electrical device etc.
This will be displayed only if VibeRotor is selected for the
DSP Type parameter explained above.
This sets the speed of the vibrato effect that is applied
when you have selected Vibraphone and are using the
VibeRotor pedal.
See the procedure on page 80.
Setting range:
1 – 10
This will be displayed only if VibeRotor is selected for the
DSP Type parameter explained above.
It turns on/off the vibrato effect that is applied when you
use the VibeRotor pedal.
See the procedure on page 80.
Setting range:
On/Off
Setting the chorus on/off
[ChorusOnOff]
Selecting the DSP type*
[DSP Type (DSP)]
TIP
B
D
NO YES
A
C
Main Set?-->
ChorusOnOff Off
B
D
NO YES
A
C
Main Set?-->
DSP Type DelayLCR
Setting the speed of the vibraphone
vibrato effect*
[VibeRotorSpeed]
Turning the vibraphone vibrato effect
on/off*
[VibeRotorOnOff (RotorOnOff)]
TERMINOLOGY
B
D
NO YES
A
C
Main Set?-->
VibeRotorSpeed 6
B
D
NO YES
A
C
Main Set?-->
VibeRotorOnOff On