Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 26)

Selecting and Playing Voices
CLP-380 Owner’s Manual 26
Basic Operation
[REVERB]
This control adds reverberation to the sound by simulating the natural reverberation of a
concert hall.
Procedure
Pressing the [REVERB] button repeatedly toggles the
reverb on and off.
Even if the reverb effect is turned off, a “soundboard reverb” effect will be applied
when the GrandPiano1 or GrandPiano2 voice is selected.
[CHORUS]
This control adds spread and spaciousness to the sound.
Procedure
Pressing the [CHORUS] button repeatedly toggles the
chorus on and off.
You can turn the chorus effect on and off by pressing the [CHORUS] ON/OFF
buttons on the panel and by setting the Chorus On Off parameter in the VOICE
SETTING menu (see page 89). The [CHORUS] ON/OFF button setting on the
panel is temporary. That is, if you select another voice, the chorus setting for the
previous voice is cancelled. The Chorus On Off parameter setting is saved for each
voice. That is, if you select a given voice, the chorus setting is automatically turned
on or off according to the saved chorus setting.
You can select a reverb type via the
Reverb Type parameter in the
“VOICE SETTING” menu, and
adjust the reverb depth for the
selected voice via the Reverb Send
parameter. (See page 88.)
Normal setting = ON
TIP
TIP
You can select a chorus type via
the Chorus Type parameter in the
“VOICE SETTING” menu, and
adjust the chorus depth for the
selected voice via the Chorus Send
parameter. You can also turn
chorus on or off via the Chorus On
Off parameter. (See page 89.)
Normal Setting:
The normal chorus on/off setting is
different for each voice.
TIP
TIP