Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 64)

Internet Direct Connection (IDC)
CLP-380 Owner’s Manual 64
Basic Operation
The messages are listed in alphabetical order.
Message List (IDC)
Message Meaning
Execution of the operation failed because the recorded data has not been saved. Save the data
by following the instructions “Saving recorded songs to a USB storage device ... [Save]” on
page 42.
Currently checking whether the USB wireless LAN adaptor connected to the musical
instrument is compatible or not.
This might take about 5 minutes. Please wait for a while.
An error in communication with the Internet occurred.
Confirm whether the connection is correct by “Connecting the Instrument to the Internet”
on page 51.
* For detailed information on the error, refer to the “Error Code List (IDC)” on page 66.
A communication timeout occurred.
If this message appears repeatedly, the communication may be unreliable. Make sure that
your communication environment is appropriate.
The connection test of the instrument to the Internet has failed.
Confirm whether the connection is correct by “Connecting the Instrument to the Internet”
on page 51.
* For detailed information on the error, refer to the “Error Code List (IDC)” on page 66.
Currently connecting to the Internet by a USB wireless LAN adaptor whose compatibility
has not been confirmed.
The instrument could not be successfully connected to the Internet.
Confirm whether the connection is correct by referring to “Connecting the Instrument to
the Internet” on page 51.
* For detailed information on the error, refer to the “Error Code List (IDC)” on page 66.
The connection test of the instrument to the Internet has succeeded.
An error occurred.
Check the error code number in the display and refer to the “Error Code List (IDC)” on
page 66 for an explanation.
The particular USB wireless LAN adaptor which is connected to the instrument is invalid.
Use a USB wireless LAN adaptor whose compatibility has been confirmed by Yamaha
(page 122).
This message is displayed when the WEP key input is incorrect.
Re-input the correct WEP key.
The USB wireless LAN adaptor is not recognized by the instrument.
• Confirm whether the connection of the USB wireless LAN adaptor to the instrument is
correct.
• Use the [SELECT] switch to select the desired terminal (page 123).
The particular USB wireless LAN adaptor which is connected to the instrument is
unsupported.
CannotOperate Exit-->
CheckingLANadaptor
Communication Exit-->
Error (xxxx)
Communication Exit-->
Timeout (xxxx)
ConnectError Exit-->
(xxxx)
Connecting
UnknownLANadaptor
ConnectionError Exit-->
(xxxx)
ConnectSucceeded OK-->
ErrorOccurred Exit-->
(xxxx)
Invalid Exit-->
LANadaptor
InvalidWEPkey
NoWirelessAdaptor
UnknownLANadaptor OK-->