3Com Wireless LAN Controller WX2200 - Manual (Page 125)

Define Site Information 125
To add site information
1 Select the RF Planning tool bar option.
2 In the Organizer panel, click the name of the network plan.
3 Select Create Site in the Task List panel. The Create Site wizard, a series
of dialog boxes, prompts you for information about the new site.
4 In the Site Name box, type a name for the site (1 to 80 alphanumeric
characters, with no spaces or tabs), and click Next.
5 To change the Country Code, select the country where the network is to
be deployed in the Country Code list.
6 In the Channel Set (802.11b/g) list, select the set of operating channels
for any 802.11b/g MAP radios you plan to use (if different from the
default), and click Next.
7 In the Number Of Buildings box, specify how many buildings are in your
site, and click Finish.
When you specify the number of buildings a site contains, 3WXM creates
each building using the default settings. You can edit the buildings
3WXM creates or you can add new buildings.