3Com Wireless LAN Controller WX2200 - Manual (Page 99)

Create a Service Profile 99
3WXM uses its verification rules to check the switch’s configuration. If an
item in the configuration generates an error or warning, 3WXM displays
the error or warning message.
7 Review the verification messages to determine whether you will need to
make changes to the switch’s configuration after uploading it into
3WXM.
8 Click Next.
9 Click Finish.
10 If 3WXM displayed error or warning messages, select the Verification tool
bar option. (See the “Verifying Configuration Changes” chapter in the
Wireless LAN Switch Manager Reference Manual .)
Create a Service
Profile A service profile contains the configuration for the service you want to
offer, such as employee access, guest access, or multi-hosted access.
For more information about service profiles, see “Wireless
Configuration” on page 36. For more information about wireless
services, see “Which Services To Provide?” on page 30.
To create a service profile
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select Wireless Services.
5 In the Task List panel, select one of the following:
„
802.1X Service Profile—Provides wireless access to 802.1X clients.
„
Voice Service Profile—Provides wireless access to Voice over IP (VoIP)
devices.
„
Web-Portal Service Profile—Provides wireless access to clients who log
in using a web page.
„
Open Access Service Profile—Provides wireless access to clients
without requiring them to log in.
„
Custom Service Profile—Provides wireless access based on the
combination of option you choose. (Use this option only if none of the
other options applies to the type of service you want to offer.)