3Com Wireless LAN Controller WX2200 - Manual (Page 69)

Configure Guest Access Services 69
Configure Guest
Access Services Guest access is access for visitors at your location and is typically clear (no
encryption).
This section contains the following information about how to configure
Guest access services:
„
“Task Table” on page 69
„
“Step Summary” on page 71
„
“Optional: Configure Mobility Profiles” on page 81
Table 11 contains the tasks you must perform to configure Guest access
services. The “Step Summary” provides the configurable options you
should set. The table contains references to the section “Example:
Configure Employee Access” on page 55. The references are provided in
case you want to refer back to detailed steps. However, be sure to use
the configurable options for Guest access services set forth in the “Step
Summary” on page 71. Also, you can optionally configure mobility
profiles for your Guest access services to limit access based on criteria,
such as RF coverage area or time of day.
Task Table Table 11 contains the tasks you need to perform to create Guest access services.
For a summary of configurable items, see “Step Summary” on page 71.
Table 11 Creating a Service for Guest Access
Task Path
Primary Parameters to
Configure
“Create a
Radio Profile”
on page 56 1 Tool bar option: select
Configuration.
2 Organizer panel: expand
the WX switch.
3 Expand Wireless.
4 Click Radio Profiles.
5 Select Radio Profile in the
Task List.
From the Create Radio Profile
wizard:
„
Radio profile name: enter a name
After you create the service
profile, you can map it to the
radio profile.
After you install the MAPs, you
can map their radios to the radio
profile.
Note: The examples in this chapter
configure the radio profile first.
However, you also can configure
the radio profile later as part of
service profile configuration.