3Com Wireless LAN Controller WX2200 - Manual (Page 155)

M
ANAGING AND
M
ONITORING
Y
OUR
N
ETWORK
This chapter provides information to help you deploy the services you
configured for your wireless network, enable communication between a
3WXM client and 3WXM Services, and enable and configure monitoring.
This chapter also provides three monitoring examples you can use as a
guide to troubleshooting user connectivity issues in your network, and
provides you with information about configuring WX switch
management services and performing specific administrative tasks
For an overview of the types of monitoring available in 3WXM, see
“Management and Monitoring” on page 43.
For detailed information about monitoring, see the chapter “Monitoring
the Network” in the
Wireless LAN Switch Manager Reference Manual .
For detailed information about performing administrative tasks on a WX
switch, see the chapter “Configuring WX System and Administrative
Parameters” in the
Wireless LAN Switch Manager Reference Manual .
Deploy Your
Configuration Any changes you make to your network in 3WXM are saved in the
network plan on the server, but the changes are not applied to your
network until they are deployed. You see the changes in 3WXM, but the
changes are only in the network plan. To implement the changes in the
live network, you must deploy them to the WX switches in the network.
You can easily apply a configuration to multiple WX switches, or deploy
changes to a single WX switch.
3WXM allows you to deploy changes immediately or schedule
deployment of the changes.
To immediately deploy local changes
1 Select the Devices tool bar option.
2 At the bottom of the Task List panel, select Change Management.
7