3Com Wireless LAN Controller WX2200 - Manual (Page 54)

54 C HAPTER 3: C ONFIGURING W IRELESS S ERVICES
Step Summary The following list summarizes the fields selected or configuration items
entered in the example that follows to configure Employee access:
1 Create a radio profile.
„
From the Radio Profile wizard, enter RadioProfile1 as the name of the
radio profile.
„
Click Finish.
2 Configure the RADIUS back end:
„
Configure the RADIUS server for 802.1X. Use the recommended EAP
method, PEAP + MS-CHAPv2.
„
Set up each WX switch as a RADIUS client.
„
Define any desired 3Com vendor-specific attributes (VSAs).
“Create a
Service Profile
for 802.1X
Access” on
page 61 1 Tool bar option: select
Configuration.
2 Organizer panel: expand
the WX switch.
3 Expand Wireless.
4 Click Wireless Services.
5 Select 802.1X Service
Profile in the Task List.
From the Create Service Profile
wizard:
„
Service profile name: edit name
„
SSID name: enter name
„
Security mode: select WPA (and
deselect Dynamic WEP)
„
Encryption type: use TKIP
(already selected)
„
EAP Type: use External RADIUS
Server (already selected)
„
RADIUS server group: select one
„
SSID default VLAN: enter name
„
Radio profile: select one
“Set Up
VLANs on WX
Switches” on
page 66 1 Tool bar option: select
Configuration.
2 Organizer panel: expand
the WX switch.
3 Expand System.
4 Click VLANs.
5 Select VLAN in the Task
List.
From the Create VLAN wizard:
„
VLAN Name: enter name
„
VLAN ID: select number
„
IP Address: enter IP Address
„
Ports: select them and either
move them (use them only in
the new VLAN) or add them
(share them with other VLANs)
„
If you add them, select Tag
Table 9 Creating a Service for Employee Access (continued)
Task Path
Primary Parameters to
Configure