3Com Wireless LAN Controller WX2200 - Manual (Page 21)

Connect 3WXM Clients to 3WXM Services 21
Configure 3WXM
Services
You can change the properties of 3WXM Services.
If a firewall is enabled on the host where you install 3WXM Services,
3WXM Services will not be able to communicate with 3WXM client or
with WX switches unless the firewall is configured to allow through
traffic for the SSL and SNMP ports (443 and 162 by default).
To configure 3WXM Services:
1 Select Tools > 3WXM Services Setup dialog box from the 3WXM main
tool bar. The 3WXM Services Setup wizard is displayed.
By default, a username and password are not required to access 3WXM
Services from 3WXM client. You can configure user accounts for
administrative, provisioning, and monitoring access. (See “3WXM Access
Control” on page 23.)
2 You can optionally configure the following:
„
Select the arrow buttons to change the HTTPS Server Port, which is
the port on which 3WXM Services listens for requests from 3WXM
client.