Festool CS 50 EB PRECISIO - Manual (Page 21)

21
Service your machine regularly to ensure that it
functions properly:
- Vacuum off dust deposits
- Keep the guide bars (1.10) clean and grease
them regularly
- A worn or damaged bench insert is to be re-
placed
- The slider (11.1) can be used to open the hatch
(11.3) to enable removal of cutting residues
from the lower protective cover. In order to re-
move larger deposits, the hatch can be opened
completely by removing the screw (11.2). Prior
to commissioning, the hatch must be closed
again!
- On completion of your work, wind the power
cable around the holders (2.1).
- A damper means that the saw unit runs back
evenly across the entire drawing length. If this
is not the case, the damper can be adjusted
through the hole (2.5).
9 Accessories, tools
Use only original Festool accessories and Festool
consumable material designed for this machine
because these components are designed spe-
cifi cally for the machine. Using accessories and
consumable material from other suppliers will
most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material!
Festool offers a comprehensive range of acces-
sories that ensures versatile and effective deploy-
ment of your machine, e.g. table widening, table
lengthening, sliding table, mitre guide, transport
rollers, extraction set.
In order to be able to saw different materials
quickly and cleanly, Festool offers saw blades that
are specially designed for your machine.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
”www.festool.com”.
10 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
11 Warranty
Our equipment is under warranty for at least 12
months with regard to material or production
faults in accordance with national legislation. In
the EU countries, the warranty period is 24 months
(an invoice or delivery note is required as proof of
purchase). Damage resulting from, in particular,
normal wear and tear, o-verloading, improper
handling, or caused by the user or other damage
caused by not following the operating instruc-
tions, or any fault acknowledged at the time of
purchase, is not covered by the warranty. Damage
caused by the use of non-original accessories and
consumable material (e.g. sanding pads) is also
excluded. Complaints will only be acknowledged
if the equipment has not been dismantled before
being sent back to the suppliers or to an author-
ised Festool customer support workshop. Store
the operating instructions, safety notes, spare
parts list and proof of purchase in a safe place.
In addition, the manufacturer‘s current warranty
conditions apply.
Note
We reserve the right to make changes to the tech-
nical data contained in this information as a result
of ongoing research and development work.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As “downstream users”
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach