Petzl EXO ESCAPE SYSTEM - Manual (Page 5)

5 D30015 B_EXO ESCAPE SYSTEM_D305020B (131210)
8
Installation on the harness
Attach the bag to
the harness belt, on
your right, with the
two Velcro strips and the
rear positioning strap
vertically or horizontally
oriented, depending on
the harness.
CLIPS VELCROS
Belt
The EXO must always be connected to the harness attachment point.
An extended attachment point allows the OK TRIACT BAR to be permanently
connected to the harness with the bag attached at the side.
Pay attention to the orientation of the OK TRIACT BAR in the attachment
point because this determines the correct position of the descender during
evacuation (see drawing). Make sure the gate is correctly closed and locked.
Good
position