Sennheiser SR 2020-D - Manual (Page 103)

35
Using the components
• An additional temperature protection prevents
overheating inside the charging case. If the tem-
perature inside the charging case exceeds safety
limits, the charging process will be interrupted
and will only be restarted when the charging case
has cooled down.
• When not using the receivers for extended
periods of time, charge them about every six
months in order to prevent deep discharge
damage to the rechargeable batteries.
Setting a channel
To set the complete system to a certain channel,
proceed as follows:
1. Set the bodypack transmitter/radio microphone to
the desired channel (see next section).
2. Set one of the receivers to the same channel (see
“Setting the channel on the receiver” on page 37).
3. Automatically set all other receivers to the same
channel using the channel copy function (see
“Setting the receiver channel(s) using the chan-
nel copy function” on page 37).
Setting the channel on the bodypack transmitter/
radio microphone
To set the bodypack transmitter or the radio micro-
phone to the desired channel, use the operating menu
of the device. An overview of the operating menus is
given from page 49 onwards.
Tourguide2020_516509_0909_Sp6.book Seite 35 Montag, 22. März 2010 1:12 13