Sennheiser SR 2020-D - Manual (Page 89)

21
The operating controls
Indications and displays on the charging
case
Operation indication
The LED POWER
²
lights up as long as the mains
supply is switched on.
Temperature indication
The LED TEMP ERROR
¶
lights up if the temperature in
the charging case gets too high and will remain on
until the temperature drops to a safe level. All charg-
ing processes are interrupted until the temperature
drops to a safe level.
LED indication for “automatic copying” function
The LED COPY AVAILABLE
º
lights up green when
the “automatic copying” function is available. This
happens
• when a switched-on receiver is placed into the
charging compartment with channel copy
function (master)
µ
• and at least one receiver is placed into one of the
other receiver charging compartments (slaves,
light blue in the diagram)
´
.
The LED COPY AVAILABLE
º
goes off when the “auto-
matic copying” function is not available. This happens
• when the receiver in the charging compartment
with channel copy function (master)
µ
is switched
off,
• or when the receiver is removed from the charging
compartment with channel copy function
(master)
µ
,
• or when all 19 charging compartments (slaves)
´
are empty.
¶
²
´
µ
Tourguide2020_516509_0909_Sp6.book Seite 21 Montag, 22. März 2010 1:12 13