Sennheiser SR 2020-D - Manual (Page 109)

41
Using the components
Changing the sensitivity of the bodypack
transmitter’s line input
To adjust the sensitivity of the line input to match the
connected audio source:
̈
Make sure that the line input is switched on (see
previous section).
̈
Connect the external audio source, switch it on and
start playback.
̈
Press the SET button
µ
.
The operating menu appears and the first menu
item “
CHAN ” flashes on the display.
̈
Repeatedly press the
̆
/
̄
rocker button
¾
until
“ SENSIT ” flashes on the display and the LINE level
display
ቦ
appears.
̈
Press the SET button
µ
.
The current input sensitivity and the LINE level
display
ቦ
appear on the display.
̈
Press the
̆
/
̄
rocker button
¾
to change the
input sensitivity so that the LINE level display
ቦ
shows full deflection during the loudest passages,
but the yellow LED
PEAK
º
does not light up per-
manently.
̈
Press the SET button
µ
to permanently store the
setting.
“
STORED ” briefly appears on the display, indicating
that the sensitivity of the line input has been
stored.
LINE
CH 03
MIC
ቦ
Tourguide2020_516509_0909_Sp6.book Seite 41 Montag, 22. März 2010 1:12 13