Sennheiser SR 2020-D - Manual (Page 95)

27
Putting the components into operation
Note:
Always charge the accupack in the charging
compartment
³
of the charging case (see “Charg-
ing the BA 2015 accupack” on page 33).
Inserting and replacing the batteries/accupack of
the bodypack transmitter
For powering the bodypack transmitter, you can
either use the rechargeable BA 2015 accupack
´
or
two 1.5 V AA size batteries. NB: Do not use any other
rechargeable batteries!
̈
Push the two battery compartment catches
ƹ
and
open the battery compartment cover
¿
.
̈
Insert the BA 2015 accupack
´
or the batteries as
shown in the diagram on the left. Please observe
correct polarity when inserting the accupack/
batteries.
̈
Close the battery compartment cover
¿
.
Connecting a microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 8.
̈
Connect the microphone to the microphone
input
»
of the bodypack transmitter.
̈
Lock the plug by screwing down the coupling ring.
̈
Adjust the sensitivity of the microphone input as
described on page 42.
ƹ
ƹ
Tourguide2020_516509_0909_Sp6.book Seite 27 Montag, 22. März 2010 1:12 13