Sennheiser SR 2020-D - Manual (Page 96)

28
Putting the components into operation
Connecting external audio sources
You can connect an external audio source such as a CD
player, MP3 player, tape player, etc. to the bodypack
transmitter. (Please note that you cannot connect a
second microphone.) Both signals – the microphone
input signal and the line input signal – are mixed
together equally in the transmitter.
̈
Connect the line output of the external audio
source to the line input
³
of the bodypack trans-
mitter.
̈
Lock the plug by screwing down the coupling ring.
̈
Switch the line input on as described on page 40.
̈
Adjust the sensitivity of the line input as described
on page 41.
Attaching the bodypack transmitter to clothing
The bodypack transmitter is attached to clothing (e.g.
belt, waistband) with the supplied belt clip
ƻ
.
The clip is detachable so that you can also attach the
bodypack transmitter with the antenna pointing
downwards. To do so, withdraw the clip
ƻ
from its
fixing points and attach it the other way round.
Signal
LINE input:
Mic input (Electret):
Signal
Mic input (dynamic):
Signal
Signal
LINE input:
Signal
LINE input:
Tourguide2020_516509_0909_Sp6.book Seite 28 Montag, 22. März 2010 1:12 13