Sennheiser SR 2020-D - Manual (Page 107)

39
Using the components
Muting the devices
Muting the bodypack transmitter
̈
Slide the MUTE switch
·
to the left, to “ MUTE “.
̈
The red LED LOW BATT / MUTE
¶
lights up perma-
nently. The MIC level display
ብ
no longer shows
any deflection. The bodypack transmitter’s micro-
phone input is muted.
Note:
The muting function (MUTE) mutes the microphone
input
»
but not the line input
¿
. This function
enables a pre-recorded track to be played through
the line input without being disturbed by the tour
guide’s microphone. When the track has finished,
the guide can un-mute the microphone and con-
tinue talking.
To deactivate the muting function:
̈
Slide the MUTE switch
·
back to the right.
The red LED LOW BATT / MUTE
¶
goes off. The MIC
level display
ብ
and the LINE level display
ቦ
indi-
cate the current levels.
Muting the radio microphone
̈
Turn the protective cap
²
so that the MUTE
switch
¹
becomes accessible.
̈
Slide the MUTE switch
¹
in the direction of the
arrow.
“
MUTE ” appears on the display of the radio micro-
phone. After 5 minutes, “ CH OFF ” appears on the
display (see “Display of the energy saving mode”
on page 16).
To deactivate the muting function:
̈
Slide the MUTE switch
¹
back in order to transmit
the audio signal again.
LINE
CH 03
MIC
ብ ቦ
»
¿
²
¹
Tourguide2020_516509_0909_Sp6.book Seite 39 Montag, 22. März 2010 1:12 13