Sennheiser SR 2020-D - Manual (Page 113)

45
Using the components
Loading the factory-preset default settings
To load the factory-preset default settings of the
bodypack transmitter/radio microphone:
̈
Press the SET button.
The operating menu appears and the first menu
item “
CHAN ” flashes on the display.
̈
Repeatedly press
̆
/
̄
until “ RESET ” flashes on the
display.
̈
Press the SET button.
“ RST.OK ” flashes on the display.
̈
Press the SET button to load the factory-preset
default settings.
“
DONE ” briefly appears on the display. The body-
pack transmitter/radio microphone is reset to the
following factory-preset default settings:
• Channel: 1
• Line input: switched off
(bodypack transmitter only)
• Input sensitivity:
– Line input: – 24 dB
(bodypack transmitter only)
– Microphone input: –12 dB
• Lock mode: deactivated
• Infra-red service interface: deactivated
Activating/deactivating the lock mode
The lock mode prevents the bodypack transmitter/
radio microphone from being accidentally pro-
grammed or switched off during operation.
PEAK
ON/OFF ON/OFF
SET SET
MUTE
LOW BATT
Radio microphone Bodypack transmitter
Tourguide2020_516509_0909_Sp6.book Seite 45 Montag, 22. März 2010 1:12 13