Basic phone operation – Garmin NavTalk User Manual

Page 36

Advertising
background image

24

Basic Phone

Operation

SECTION 3

3.1 Placing a Call

To place a call:

1. Manually enter the phone number from any page using the

dialing keypad and press SEND. The call timer starts count-

ing after you place the call. Or...

2. From the PhoneBook Page highlight the name or number

you want dialed and press SEND. The call timer starts

counting after you place the call. Press PAGE or QUIT to

access the PhoneBook Page. Or...

3. If the number is stored on the Speed Dial Page simply press

the Phone Keypad number that corresponds to the phone

numbers placed on the Speed Dial list. Hold the key down

for more than 1 second to dial that number from any display

on the NavTalk.

3.2 Answering a Call

To answer a call:

1. Press SEND. An incoming call is indicated by a ringing tone,

and the “Call—Press SEND” message flashing on the dis-

play. The call timer starts counting.

NOTE: If a call is not answered, the “

Call—Press SEND”

message

will continue flashing and the ringing

tone will continue until

SEND

is pressed. Press-

ing END will mute the ringer for this call.

3.3 Unsuccessful Call Attempts

If you hear one of the following signals, you have

not successfully completed your call:

• Fast Busy - The cellular system is busy. To cor-

rect, press

SEND again after ending the call, to

immediately redial the call, or press

END and dial

the number later.

• Alternating high/low tone -The cellular system

could not complete the call. You may have tried
to place a call before the NavTalk was fully opera-
tive or poor signal strength is preventing the cel-
luar system from receiving the NavTalk signal. To
correct, press

SEND to immediately redial the call,

or press

END and dial the number again.

• Busy signal - The called party’s phone is busy.

NOTE: When placing a call, wait for the “IN USE” icon

and phone call should connect. If a connection

cannot be made, fail tones will sound.

Call Notification

Manual Dialing Page

Cellular Status Display

When Redialing a Phone

Number

NavTlkOM.qxd 2/1/00 2:45 PM Page 34

Advertising