Garmin NavTalk - Manual (Page 80)

GPS Receiver
Reference
SECTION 6
If the name wasn’t originally displayed it will appear
when the arrow is placed on the object. This feature
applies to everything displayed except route lines and
track log data.
When a waypoint name is highlighted, you can
review information about the waypoint, list waypoint
options, or execute a GOTO right from the Map Page.
To select an on-screen waypoint with the
panning arrow:
1. Use the ARROW Rocker Pad to highlight the desired way-
point.
2. Press ENTER to review information for the selected way-
point.
3. To exit the information page, press QUIT.
To GOTO a highlighted waypoint:
1. With the waypoint highlighted, press # , followed by ENTER.
GOTO can be used anywhere on the map. If a way-
point is not highlighted, a new waypoint (called “MAP”)
will be created at the arrow location before the GOTO
starts.
To cancel the pan function and re-center the
map on your position:
1. Press QUIT.
2. To display the Map Page options menu, press the MENU
key from the Map Display.
6.3.2 Map Page Options Menu
The following Map Page options are available:
Data Fields Off - allows you to select between a
full-screen map display or the default map display with
data window. If the data fields are off, ‘Data Fields On’
will appear as an option instead.
To turn the data fields on or off, highlight ‘Data Fields Off’ (or
‘Data Fields On’) and press ENTER.
2 Data Fields -allows you to choose a format
with only two data fields providing more map display.
4 Data Fields - allows you to choose a format
with only four data fields with selectable data display.
Zooming Out
Panning Arrow
Zooming In
68
NvTlkGPS.qxd 2/1/00 4:13 PM Page 8