Garmin NavTalk - Manual (Page 49)

37
Basic GPS
Using the
Simulator
SECTION 4
To rename the waypoint and change its
symbol:
1. Use the cursor to highlight the name field,
then press ENTER.
2. Enter the new waypoint name “HOME” using
the PHONE KEYPAD then press ENTER.
3. Cursor over to highlight the waypoint symbol
field and press ENTER.
4. Scroll down the symbol menu and select the
“Residence” symbol. Then press ENTER.
You should now have two waypoints in memo-
ry and on the map: “SIMUL8” and “HOME”.
To enter a simulated speed and animate
the displays:
1. Press PAGE repeatedly until the Compass
Page appears.
2. Enter a simulated speed of 10 (mph or knots)
using the ARROW Rocker Pad. Press the UP
arrow once to select 10. Observe that the
value of 10mh is now assigned to the Speed
field of the Compass Page.
3. Press the PAGE (or QUIT) key repeatedly
until you have returned to the Map Page.
Notice that the information displayed on
the Map Page is slowly moving as it would in
actual use. Other primary navigation displays
are the Compass and Highway Pages.
4.9 To view the Compass Page:
1. Press the PAGE key repeatedly until the
Compass Page is displayed.
The Compass Page provides you with
graphic steering guidance to a destination way-
point. The middle of the page features a rotat-
ing compass ring that shows your course over
ground (track) while you are moving, and a
Renaming a Waypoint
Entering a Simulated Speed
Compass Page
NavTlkOM.qxd 2/1/00 2:45 PM Page 47