Garmin NavTalk - Manual (Page 57)

To enter a new number in the PhoneBook:
1. Access the PhoneBook page and press MENU
to bring up the PhoneBook Menu.
2. Highlight “New PhoneBk #” and press ENTER,
to bring up the PhoneBook entry page. Press
ENTER to begin entry and then use the PHONE
KEYPAD keys to enter the name. The character
block moves to the next position when you pause
after entry. Use the 1 key to enter spaces and a
comma or the 0 key for this and other punctua-
tion. Press ENTER when finished and cursor
down to the number field.
3. Enter the phone number using the PHONE KEY-
PAD. This field automatically spaces the dial string.
To quickly remove an entry in either the name or num-
ber field, hold down the LEFT ARROW Rocker Pad
key with the field highlighted after pressing ENTER.
Move to the Speed Dial field, press ENTER and
assign a Speed Dial number if desired, then cursor to
“Done” and pressENTER to complete the entry.
To remove a name from the PhoneBook:
1. Highlight ”Delete Number” and press ENTER.
You will be prompted to confirm the deletion
before pressing ENTER to remove.
2. To clear the PhoneBook of all names, highlight
“Delete All” and press ENTER. You will be prompt-
ed to confirm this deletion before pressing ENTER
to remove all names from your directory.
You can use the Spell ‘n Find feature to
quickly find a name in the phonebook without
scrolling through the name lists. Access the
PhoneBook, select Menu and arrow down to
Spell N’ Find, then spell out the first part of the
name you want to find until it appears on the
display, and press
SEND.
5.4 Redialing numbers previously called
using the Last Dialed Page
You may often need to speak with the same
person throughout the day or may not have
made contact with that person when you last
dialed their number. By accessing the Last Dialed
Page you can recall from the list of last dialed num--
45
Cell Phone
Reference
SECTION 5
When a Number from the
Last Dialed List is Redi-
aled, it Moves to the Top of
The List with a New
Time/Date Stamp.
You are always prompted
before a deletion is
performed anywhere in the
NavTalk Programming.
NavTlkOM.qxd 2/1/00 2:46 PM Page 55