Garmin NavTalk - Manual (Page 60)

48
Cell Phone
Reference
SECTION 5
To program Answer Mode:
1. Use the DOWN ARROW key to highlight the field.
2. Press ENTER to display Manual Answer, Auto
Answer or Auto Pager from the “Pop-Up” menu.
3. If choosing Auto Answer or Auto Pager, press
the rocker switch right arrow to move to the
Number of Rings field, press ENTER and then
use the UP ARROW keys or PHONE KEYPAD
to enter the number of rings. You are limited to
nine rings. Press ENTER to store.
To program Auto-Redial:
1. Use the DOWN ARROW Rocker Pad to high-
light the On/Off field and press ENTER.
2. Highlight On or Off and press ENTER.
3. If you selected On, move to the Number of Times
field and press ENTER. Use the ARROW or
PHONE KEYPAD to set the number of times you
would like to redial any given number (the maximum
is nine), then press ENTER. A “Redial” prompt will
appear when active.
To program Auto Data:
1.Highlight the padlock icon and press ENTER. A
pop up window will appear at the base of the
display. Press ENTER to key in your password.
After you have keyed in the password press
ENTER and observe that the icon is now open
and a PIN window appears at the base of the display
2. Use the ARROW Rocker Pad to highlight
the Auto Data field and then press the ENTER key.
To enter your Calling Card Access PIN
into the Phone programming:
To automate calling card dialing you can
store your PIN number in the NavTalk for entry
into a dialing string as a code “C” as explained
on pages 56 and 57.Your PIN is password pro-
tected. Refer to “Security” page 49.
1.Repeat Step 1 for programming Auto Data.
2.Cursor to the PIN field and enter your PIN. Then
press ENTER.
3. Cursor back to the icon and press ENTER. Press
ENTER again when the password “Pop Up”
appears. Enter your password and then press
ENTER. The lock icon will close and your dis-
played PIN will be hidden, but can be inserted in
a call dial string by using the “C” code. (Ref. pg.56)
Phone Set-Up Directory pro-
grammed for Auto-Pager after 2
Rings and Auto-Redial turned Off.
The Auto-Data switch can be
turned On or Off using the
Security Password
Padlock icon open and PIN field
open for PIN entry. After entry,
close padlock icon and the field
will be closed to viewing.
NavTlkOM.qxd 2/1/00 2:46 PM Page 58