AASTRA 4425 IP Vision for BusinessPhone User Guide - Manual (Page 23)

23 BusinessPhone – Dialog 4425 IP Vision
Start the Phone – Log On/Off
Update software
If new software has to be loaded into your phone, the display is
showing this. When new application software is available, the
following display is shown:
The xx indicates a timer counting down seconds. If no key is
pressed during this time (approximately. 60 seconds), “Yes” is
selected automatically. You can speed up the procedure by
pressing the Loudspeaker key
(Yes) Press to update the software (=Yes).
The software download takes about 30 seconds, then the startup
procedure continues automatically.
Note: It is important that you do not disconnect the power
from the phone while the new software is being
downloaded and saved. If a power failure occurs, the
software must be downloaded again.
If you want to continue to use the previously stored settings:
No Press to use the current version of the software (=No).
Settings CallList Contacts
A new version of the bootrom software
is vailable on the server, update?
xx
(Yes) No
Settings CallList Contacts
A new version of the application software
is available on the server, update?
xx
(Yes) No