VEGA Conductive electrodes - Manual (Page 20)

20 Conductive measuring system
Probe with 4 rod or cable
electrodes
Mounting instructions
2.3 VEGATOR 532 Ex
VEGATOR 532 Ex can be either mounted in a
single housing type 505 Ex or into a carrier
BGT 596 or BGT 596 Ex by means of a
module.
- Module consisting of:
Multipoint connector DIN 41 612, series F,
33-pole (d, b, z) with coded pin and
mounting material for mounting in carrier
BGT 596
- Ex-module consisting of:
Multipoint connector DIN 41 612, series F,
33-pole (d, b, z) with coded pins, Ex-
separating chamber and mounting material
for mounting in carrier BGT 596 Ex
- Single housing
Plastic housing type 505 Ex for single
mounting of signal conditioning instrument
with instrument width 5 TE (25,4 mm)
Mounting carrier
Mount the appropriate module (standard or
Ex-version) on your carrier BGT 596 or BGT
596 Ex. Wire the connection of the multipoint
connector acc. to section "3 Electrical
connection".
The multipoint connector is available as
follows:
- Wire-Wrap standard connection
1,0 x 1,0 mm
- Plug connection 2,8 x 0,8 mm
- Termi-Point standard connection
1,6 x 0,8 mm
- Soldering connection
- Screw terminals 2 x 0,5 mm
2
For further information concerning mounting
see the operating instruction of the carrier.
When mounting VEGATOR 532 with Ex-
approval into a carrier, you have to use a
VEGA-Ex-module. Keep a distance of at least
10 mm (2 TE) to instruments of other
manufacturers. When you want to mount
VEGATOR completely to the left in the carrier,
you have to mount a blind cover of at least
20 mm (4 TE) in front of the module of the
instrument.
4
3 2
1
1 5
4
3
2
Probe with 5 rod or cable
electrodes
2.2 VEGATOR 256C
The signal conditioning instrument VEGATOR
256C can be either mounted directly to the
wall via two screws or plugged to a carrier
rail 35 x 7,5 acc. to DIN EN 50 022.
Carrier rail mounting
Place VEGATOR 256C from the bottom to the
carrier rail and push the instrument to the rail
until snap-in.
Wall mounting
Fasten the instrument directly to the wall by
means of two screws (ø max. 3 mm).
4
60
7,5 22