4 vegator 631 ex, Mounting instructions – VEGA Conductive electrodes User Manual
Page 22
22
Conductive measuring system
Function coding
Ex-version
Instrument coding
VEGATOR 631
5
6
7
8
14
13
12
11
10
9
4
3
2
1
A
B
C
1
2
3
7
8
9
N
L1
-
+
Cover
Plug
Mounting instructions
2.4 VEGATOR 631 Ex
Connect the signal conditioning instrument as
follows:
- Mount the plug-in socket to the carrier rail.
- Wire the socket acc. to your requirements,
see paragraph "3 Electrical connection".
- Close the upper terminals with the supplied
covers.
- Insert the supplied coded pin into the
determined hole no. 3.
- Connect, if requested, the neighbouring
series 600 signal conditioning instrument
via the supplied plug (L1 and N).
- Choose mode A or B on the slide switch
(laterally on top).
- Mount VEGATOR 631 Ex to the plug-in
socket (2 screws).
Transparent cover
To protect the instrument against
unauthorized adjustment, the front plate of
VEGATOR 631 Ex can be provided with a
lockable transparent cover, see following
figure.
Mounting of the covers
1
2
4
3