VEGA VEGASON 66 4 … 20 mA_HART four-wire - Manual (Page 46)

9 Dismounting
9.1 Dismounting procedure
Caution:
During operation, individual cores of the transducer cable carry
a voltage of approx. 70 V. Therefore dismount VEGASON 66
only in voltage-free condition.
Take note of chapters "Mounting" and "Connecting to power
supply" and carry out the listed steps in reverse order.
9.2 Disposal
The instrument consists of materials which can be recycled by
specialised recycling companies. We use recyclable materials
and have designed the electronic modules to be easily
separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE directive 2002/96/
EG and the respective national laws (in Germany, e.g.
ElektroG). Pass the instrument directly on to a specialised
recycling company and do not use the municipal collecting
points. These may be used only for privately used products
according to the WEEE directive.
Correct disposal avoids negative effects to persons and
environment and ensures recycling of useful raw materials.
Materials: see "Technical data"
If you cannot dispose of the instrument properly, please
contact us about disposal methods or return.
Dismounting
46 VEGASON 66 - 4 ... 20 mA/HART - four-wire
28783
-EN
-060731