VEGA VEGAFLEX 66 (-20…+250°C) Profibus PA - Manual (Page 13)

keep in mind that measurement down to the tip of the probe is not
possible. The exact value of the min. distance (lower dead band) is
stated in chapter "Technical data".
Fig. 3: Vessel with conical bottom
Make sure that the probe is not subjected to strong lateral forces.
Mount VEGAFLEX 66 at a position in the vessel where no
disturbances, e.g. from filling openings, agitators, etc., can occur.
Fig. 4: Lateral load
Inflowing medium
VEGAFLEX 66 • Profibus PA 13
4 Mounting
34171
-
EN
-100427