VEGA VEGAFLEX 62 Profibus PA - Manual (Page 48)

-
Trimming accuracy - rod < 1 mm (0.039 in)
-
Cable: ø 6 mm (0.236 in) up to 60 m (196.9 ft)
-
Trimming accuracy - cable ± 0.05 %
Lateral load with rod: ø 16 mm (0.63 in) 30 Nm (22 lbf ft)
Max. tensile load with cable: ø 6 mm
(0.236 in) 30 KN (6745 lbf)
Thread in gravity weight (cable version) M 12
Input variable
Measured variable Level of liquids and solids
Min. dielectric figure of the medium ε
r
> 1.6
2
4
5
3
1
2
4
5
3
1
Fig. 25: Measuring ranges of VEGAFLEX 62
1 Reference plane
2 Probe length L
3 Measuring range (default setting refers to the measuring range in water)
4 Upper dead band (see diagrams under Accuracy - grey section)
5 Lower dead band (see diagrams under Accuracy - grey section)
Output variable
Output signal digital output signal, format according to IEEE-754
Cycle time min. 1 s (dependent on the parameter setting)
Sensor address 126 (default setting)
48 VEGAFLEX 62 • Profibus PA
10 Supplement
31839
-EN
-100426