5 accessories and replacement parts – VEGA VEGAWELL 52 4 … 20 mA_HART Pt 100 User Manual
Page 10
U
p to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
U
nless otherwise indicated, the packages must be stored only under
the following conditions:
l
N
ot in the open
l
D
ry and dust free
l
N
ot exposed to corrosive media
l
P
rotected against solar radiation
l
A
voiding mechanical shock and vibration
l
S
torage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
l
R
elative humidity 20 … 85 %
3
.5 Accessories and replacement parts
T
he interface adapter VEGACONNECT 4 enables the connection of
communication-capable instruments to the USB interface of a PC. For
parameter adjustment of these instruments, an adjustment software
such as PACTware with VEGA-DTM is required.
Y
ou can find further information in the operating instructions "Interface
adapter VEGACONNECT" (Document-ID 32628).
VEGADIS
62
is suitable for measured value indication and adjustment
of sensors with HART protocol. It is looped into the 4 … 20 mA/HART
signal cable.
VEGADIS
62
is suitable for measured value indication with sensors
without HART protocol.
Y
ou can find further information in the operating instructions
"VEGADIS 62" (D
ocument-ID 36469).
T
he measuring instrument holder is used for wall/tube mounting of
VEGABAR
series 50 pressure transmitters and VEGAWELL 52
suspension pressure transmitters. Supplied reducers enable the
adaptation to different instrument diameters. The material used is
316L.
T
he robust, heavy-duty bracket of 1.4301/304 is designed for wall
mounting VEGA instruments. The required fastening elements are
included in the shipment.
Storage
Storage and transport
temperature
Interface adapter
External indicating and
adjustment unit VEGA-
DIS 62
Measuring instrument
holder
Mounting bracket
10
VEGAWELL
52 • 4 … 20
mA/HART Pt
3 P
roduct description
35402
-EN
-111021