3 mounting steps with screwed connection – VEGA VEGAWELL 52 4 … 20 mA_HART Pt 100 User Manual
Page 13
4
.3 Mounting steps with screwed connection
1
2
3
4
5
6
Fig. 5: Threaded fitting
1
Suspension cable
2
Seal screw
3
Cone bushing
4
Seal cone
5
Threaded fitting
6
Seal
M
ount VEGAWELL 52 with screwed connection as follows:
1
W
eld the welded socket into the vessel top
2
L
ower VEGAWELL 52 to the requested height by means on the
welded socket G1½ A or 1½ NPT on the vessel side
3
I
nsert the suspension cable from below into the open screwed
connection
4
S
lide the seal cone and the cone sleeve over the suspension
cable, fasten manually with the seal screw
5
S
crew the screwed connection into the socket, fasten with SW 30
and then fasten seal screw with SW 19
H
ow to correct the height:
1
L
oosen seal screw with SW 19
2
S
lide seal cone and cone sleeve to the requested position on the
cable
3
F
asten the seal screw
R
emoval is carried out in reverse order.
VEGAWELL
52 • 4 … 20
mA/HART Pt
13
4 M
ounting
35402
-
EN
-111021