VEGA VEGAWELL 52 4 … 20 mA_HART Pt 100 - Manual (Page 25)

Note:
W
ith power supply units with integrated HART resistance (internal
resistance approx. 250 Ω), an additional external resistance is not
necessary (e. g. VEGATRENN 149A, VEGADIS 371, VEGAMET 381/
624/625, VEGASCAN 693). I
n such cases, VEGACONNECT can be
connected parallel to the 4 … 20 mA cable.
7 .2 Parameter adjustment with PACTware
F urther setup steps are described in the operating instructions manual
"DTM Collection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
K
eep in mind that for setup of VEGAWELL 52, DTM-Collection in the
actual version must be used.
A ll currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA
agency. In addition, the actual PACTware version is also
available on this CD.
I n addition, this DTM Collection incl. the basic version of PACTware
can be downloaded free of charge from the Internet. Move via www.
vega.com and "Downloads" to "Software".
7 .3 Saving the parameter adjustment data
I t is recommended to document or save the parameter adjustment
data. That way they are available for multiple use or service purposes.
T he VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
VEGAWELL 52 • 4 … 20 mA/HART Pt 25
7 S etup with PACTware
35402
-
EN
-111021