VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) 4 … 20 mA_HART four-wire Approval according to LPR radio standard - Manual (Page 47)

7 Setup with PACTware
7 .1 Connect the PC
3
1
2
Fig. 25: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 Sensor
Information:
The interface adapter VEGACONNECT 3 or additional previous
versions are not suitable for connection to the sensor.
1
5
2 4
3
OPEN
TWIST USB
LO CK
Fig. 26: Connecting the PC via HART to the signal cable
1 VEGAPULS 62
2 HART resistance 250 Ω (optional depending on processing)
3 Connection cable with 2 mm pins and terminals
4 Processing system/PLC/Voltage supply
Via the interface adapter
directly on the sensor
Connection via HART
VEGAPULS 62 • Approval according to LPR radio standard 47
7 Setup with PACTware
41719
-EN
-120301