VEGA VEGAMIP R62 Receiving unit - Relay - Manual (Page 27)

Fig. 20: The electronics is located in the housing of the processing unit
We recommend connecting VEGAMIP 62 in such a way that the
switching circuit is open when there is a level signal, line break or
failure (safe condition).
Information:
The relays are always shown in non-operative condition.
3
2 1
Fig. 21: Wiring plan processing unit - VEGAMIP 62 (receiver)
1 Relay output
2 Relay output
3 Voltage supply
When connecting to a PLC, the min. switching capacity of the relay
must be taken into account.
Wiring plan - processing
unit
Connection to a PLC
VEGAMIP R 62 • - Relay 27
5 Connecting to power supply
41912
-
EN
-120228