VEGA VEGAMIP R62 Receiving unit - Relay - Manual (Page 40)

Contact material (relay contacts) AgNi (Au plated) or AgSnO (Au plated)
Modes (switchable)
-
max. Max. detection or overflow/overfill protection
-
min. Min. detection or dry run protection
Measuring accuracy
Hysteresis approximately 1 dB
Switching delay adjustable from 0.1 … 20 s (on/off)
Min. distance 100 mm (3.94 in)
Ambient conditions
Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
Measured variable Limit level of bulk solids and liquids
Process pressure 2)
-
VEGAMIP 62, threaded version - internal
horn antenna with PTFE cover
-1 … 4 bar/-100 … 400 kPa (-14.5 … 58 psig)
-
VEGAMIP 62, plastic encapsulated an-
tenna with PP cover
-1 … 2 bar/-100 … 200 kPa (-14.5 … 29 psig)
-
VEGAMIP 62, horn antenna/316L -1 … 40 bar/-100 … 4000 kPa (-14.5 … 580 psig)
-
VEGAMIP 62, encapsulated horn anten-
na with PTFE cover
-1 … 16 bar/-100 … 1600 kPa (-14.5 … 232 psig)
-
VEGAMIP 62 with mounting adapter unpressurized (IP 67)
Process temperature (thread or flange tem-
perature)
-
VEGAMIP 62, threaded version - internal
horn antenna with PTFE cover
-40 … +80 °C (-40 … +176 °F)
-
VEGAMIP 62, plastic encapsulated an-
tenna with PP cover
-40 … +80 °C (-40 … +176 °F)
-
VEGAMIP 62, horn antenna/316L - seal:
FKM (SHS FDM 70C3 GLT)
-40 … +130 °C (-40 … +266 °F)
-
VEGAMIP 62, horn antenna/316L - seal:
FFKM (Kalrez 6375)
-20 … +130 °C (-4 … +266 °F)
-
VEGAMIP 62, encapsulated horn anten-
na with PTFE cover
-40 … +200 °C (-40 … +392 °F)
-
VEGAMIP 62 with mounting adapter
150 mm (optional)
-40 … +250 °C (-40 … +482 °F)
-
VEGAMIP 62 with mounting adapter
300 mm (optional)
-40 … +450 °C (-40 … +842 °F)
2) Note max. pressure of the process fitting
40 VEGAMIP R 62 • - Relay
9 Supplement
41912
-EN
-120228