VEGA VEGAFLEX 81 Foundation Fieldbus Coax probe - Manual (Page 84)

84
11 Supplement
VEGAFLEX 81 • Foundation Fieldbus
44215-EN-130910
FF desciptor Description Unit
DIAG_MASK_2
DIAG_OUT_2
DEVICE_IDENTIFICATION
Manufacturer ID, device type, bus type ID, measurement princi-
ple, serial number, DTM ID, device revision
DEVICE_NAME Device name
IS-SPARE_ELECTRONICS Device name
DEVICE_VERSION_INFO Hard- and software version for system, function and error
CALIBRATION_DATE Day, month and year
FIRMWARE_VERSION_ASCII Software version
HW_VERSION_ASCII
Hardware version
ADJUSTMENT_DATA Min./max.-adjustment physical, percent and offset
FIRMWARE_VERSION_MAIN Firmware versions major, minor, revision and build
PHYSICAL_VALUES
Distance, distance unit, distance status, level and status
DEVICE_UNITS Distance and temperature units of the instrument
APPLICATION_CONFIG Medium type, media, application type, vessel bottom, vessel
height
LINEARIZATION_TYPE_SEL Type of linearization
SIMULATION_PHYSCAL
INTEGRATION_DATA
Physical offset and integration time
DEVICE_CONFIG_PULS_
RADAR
Electronics variant, probe type, max. measuring range, anten-
na extension length, adjustment propagation antenna extension
lprapproval configuration
ADJUSTMENT_LIMITS_MIN Min. range min.-/max.- values physical, percent, offset
ADJUSTMENT_LIMITS_MAX Max. range min.-/max.- values physical, percent, offset
%
FALSE_SIGNAL_COMMAND %
FALSE_SIGNAL_CMD_CRE-
ATE_EXTEND
FALSE_SIGNAL_CMD_DE-
LET_REGION
FALSE_SIGNAL_CMD_STATE Busy, last command, errorcode
FALSE_SIGNAL_CMD_CON-
FIGURATION1
Amplitude safety of the 0 % curve, safety of the false signal sup-
pression, position of the 0 % and 100 % curve in near and far
range
FALSE_SIGNAL_CMD_CON-
FIGURATION2
Gradient of the manual sectors, safety at the end of false echo
memory and depending on the import range gating out the false
signals
ECP_CURVE_AVARAGING_
CONFIG
Averaging factor on increasing and decreasing amplitude
LEVEL_ECHO_MEASURE-
MENT
Function measured value filter
ECHO_CURVE_STATUS
PACKET_COUNT