VEGA VEGAPULS SR 68 Modbus and Levelmaster protocol User Manual
Page 13
13
3 Product description
VEGAPULS SR 68 • Modbus and Levelmaster protocol
41371-EN-130624
You will find additional information in the supplementary instructions
manual "Protective cover" (Document-ID 34296).
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ANSI B 16.5,
JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID
31088).
The electronics module VEGAPULS series 60 is a replacement part
for radar sensors of VEGAPULS series 60. There is a different version
available for each type of signal output.
You can find further information in the operating instructions "Elec-
tronics module VEGAPULS series 60" (Document-ID 36801).
The supplementary is a replacement part for the following sensors
with signal output Modbus:
•
VEGAPULS series 60
•
VEGAFLEX 80 series
•
VEGABAR series 80
You can find further information in the operating instructions "Supple-
mentary electronics Modbus" (Document-ID 41864).
The antenna impedance cone is used for optimum transmission of
microwaves and for sealing against the process.
You find further information in the operating instructions "Antenna
impedance cone VEGAPULS 62 and 68" (Document-ID 31381).
Flanges
Electronics module
Supplementary electron-
ics Modbus
Antenna impedance cone