9501-dcda rear i/o modules, 9501-dcda rear i/o modules -4, 9501-dcda rear i/o modules (p. 2-4) – Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter User Manual
Page 24
2
Installing a Rear I/O Module
2-4
9501-DCDA PRODUCT MANUAL
9501DCDA-OM (V1.3)
9501-DCDA Rear I/O Modules
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9501-DCDA.
Note:
Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied with
removable screw terminal block adapters. For clarity, the adapters are
omitted in the drawings below.
Table 2-1
9501-DCDA Rear I/O Modules
9501-DCDA Rear I/O Module
Description
RM20-9501-A
Provides the following connections:
• Two 3G/HD/SD-SDI coaxial input (SDI IN A and
SDI IN B)
• Four reclocked SDI input copies (RCK OUT 1 thru
RCK OUT 4)
• Four processed coaxial outputs (AN/SDI OUT 1
thru AN/SDI OUT 4) (each GUI-selectable as
analog composite or SD-SDI)
RM20-9501-A/S
Split Rear Module. Provides each of the following
connections for two 9501 cards:
• 3G/HD/SD-SDI coaxial input (SDI IN A)
• Two reclocked SDI input copies (RCK OUT 1 and
RCK OUT 2)
• Two processed coaxial outputs (AN/SDI OUT 1
and AN/SDI OUT 2) (each GUI-selectable as
analog composite or SD-SDI)