Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter - Manual (Page 32)

3
Control and Display Descriptions
3-4 9501-DCDA PRODUCT MANUAL 9501DCDA-OM (V1.3)
Cobalt ® Remote Control Panel User Interfaces
(See Figure 3-3.) Similar to the function submenu tabs using DashBoard™,
the Remote Control Panels have a Select Submenu key that is used to display
a list of function submenus. From this list, a control knob on the Control
Panel is used to select a function from the list of displayed function submenu
items.
When the desired function submenu is selected, each parametric control or
selection list item associated with the function is displayed. Scalar (numeric)
parametric values can then be adjusted as desired using the control knobs,
which act like a potentiometer. Items in a list can then be selected using the
control knobs which correspondingly act like a rotary switch. (In this manner,
the setting effected using controls and selection lists displayed on the Control
Panel are comparable to the submenu items accessed and committed using the
9501-DCDA card edge controls.)
Figure 3-3 shows accessing a function submenu and its parameters (in this
example, “Video Proc”) using the Control Panel as compared to using the
card edge controls.
Note: Refer to “OGCP-9000 Remote Control Panel User Manual” (PN
OGCP-9000-OM) or “OGCP-9000/CC Remote Control Panel User Manual”
(PN OGCP-9000/CC-OM) for complete instructions on using the Control Pan-
els.
Figure 3-3 Remote Control Panel Setup of Example Video Proc Function Setup
Video Proc function
(among others) is
accessed using the Control
Panel Select Submenu
key. Video Proc function is
selected from the list of
functions (submenu items)
3396B_3346B.JPG
9501-DCDA_3370_3372B.
When the Video Proc
function submenu is
selected, its related
parameters are now
displayed.
In this example, Color Gain
(saturation) is adjusted using
the control knob adjacent to
Color Gain