Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter - Manual (Page 38)

3
9501-DCDA Function Submenu List and Descriptions
3-10 9501-DCDA PRODUCT MANUAL 9501DCDA-OM (V1.3)
Table 3-2 9501-DCDA Function Submenu List
Input Video Controls
Allows manual or failover selection of card SDI inputs
and displays status, raster format, and embedded
group status of received SDI video.
• Input Video Source Selects the input video source to be applied to the card’s program video
input.
• SDI A and SDI B choices allow forced manual selection of
correspondingly SDI IN A or SDI IN B.
• Failover A to B sets main path preference of SDI IN A.
- If SDI IN A goes invalid, then SDI IN B is selected.
- If SDI IN A goes valid again, failover automatically reverts to
SDI IN A.
• Failover B to A sets main path preference of SDI IN B.
- If SDI IN B goes invalid, then SDI IN A is selected.
- If SDI IN B goes valid again, failover automatically reverts to
SDI IN B.
Note: Failover criteria is simple signal presence.
• Input Video Status Displays input status and audio group presence, along with elapsed time
of signal acquire.
SDI A and SDI B Status show
raster/format for both card inputs. If
signal is not present or is invalid,
Unlocked is displayed. (These
status indications are also
propagated to the Card Info pane.)
Presence of each embedded audio
group is also displayed for actively
selected input.