Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter - Manual (Page 41)

9501DCDA-OM (V1.3) 9501-DCDA PRODUCT MANUAL 3-13
Operating Instructions
9501-DCDA Function Submenu List and Descriptions
Video Alignment
Shows the card output video alignment relative to
selected video or reference sources.
This allows assessment of the card’s video timing/sync
relative to other video or house reference sources.
• Reference Relative-To Select Selects the timing source to which the card’s output video is measured
against (in example here, card output video is measured relative to frame
Reference 1).
• Alignment Timing Display Shows (in near real-time msec) the offset between the card’s output video
timing and the selected reference source.
Examples: With source set to Input Video, the card’s static latent delay is
shown. With Reference 1 selected, a slow drift indicates the card’s input is
not upstream frame synced or ref locked with this reference. A non-drifting
display would indicate that upstream video is ref locked to the selected
reference.
Table 3-2 9501-DCDA Function Submenu List — continued